FA-FDR1MD12C , Fiberall Rack Mounted Fiber Optic Patch Panel With 12 SC Adapter And Pigtail
Inner Inspection Of Fiberall Fiber Optic Patch Panel
All fiber patch panel must be inspected before shipping. The inspection is refer to national communications industry standard YD/T988-2007. And the purpose of inspection is to check the integrity and completeness of the fiber patch panel. Our quality control staff will check : 1, The fixing and protection function for fiber cable, all product should has fixing setting and protection accessories; 2,Fiber connection and terminal function, is should have enough space for patching, operating and storage ; 3, Fiber patching and record function, the optical fiber serial number can be quickly and conveniently adjusted to change the route of the transmission system by the optical fiber jumper; 4, Fiber capacity has to same as the order requirement; 5, Mechanical strength, tensile test and torsion test; 6, Box assembly, all fasteners shall be firmly and securely connected, and the surface treatment of the fasteners shall be in accordance with the 2 level as specified in article of the GB/T5267-1985 standard. 7, Label and packing.
Product Features
Magnetic lock button brings easy closing and opening.
Easy for operation and maintenance with slide-in and pull-out system.
Sliding drawer design is easy for access from both front side and rear side.
Glossy black powder-coated for a long-lasting and rust resistant
Extended depth provides more working space for splicing and cable storage
1U rack mounted can be loaded with up to 3 panels (4ports or 8 ports).
Suitable for SC, FC, ST, LC adapter, only need to change different plates.
It's suitable for ribbon or non-ribbon optical fiber cable.
It is with standard size, light weight and reasonable structure
Parameter of FA-FDR1MD12C
| Fiber Capacity |
12 Cores |
| Adapter Type |
SC Simplex |
| Pigtail Type |
SC 0.9mm 1.5m 12 colors |
| Accessories |
Fiber tray, winding wheel, production sleeve, nylon ties, screw and so on |
| Panel thickness |
1.2mm after painting |
| Environment temperature |
-40℃ ~+80 ℃ |
| Relative humidity |
<=85% ( under 30 ℃) |
| Atmosphere pressure |
70~106KPa |
| Insulated Resistance |
>=2 x 10MΩ/500V (DC) |
| Intensity |
<= 15kv(DC) /1minno spark-over and no flying arc |
Product Tags:
|
|
1U Height 19” Width Optical Fiber Patch Panel With 12 SC Adapter And Pigtail Images
|
